Acrylic Stand Offs
Available in several sizes, acrylic stand offs are understated so as not to detract from the sign itself.
The quality finish clear acrylic head may give you that "invisible" look when used with glass or clear acrylic signs.
Whilst we currently only show two sizes on the website, we do have other sizes available. Contact us for further information.
UV stabilised for interior and exterior use
Use Loctite 406 to attach to acrylic letters
1. Drill holes in panel. Use panel to mark hole positions on wall.
2. Screw threaded cups into place
3. Thread standoffs over threaded cups
4. Thread thumbscrews through panel into standoffs.
A quick and easy solution to mount any substrate as a counter or desk top display
Change the angle of the sign with higher or lower hole placements
Anodised aluminium in a satin silver finish
5mm + diameter hole required in the display substrate
Will hold up to 8mm thick substrate
Domed head is 8mm dia x 70mm length support
Introducing the new adjustable Edge Mount sign fixing that means that no holes need to be drilled into the panel for installation. This new style of edge mount standoff can be adjusted to different panel thicknesses and the locking screw in located on the body and so can be hidden from view.
Introducing the Ezi Mount Standoff:
This unique three part design enables the sign to be installed easily and quickly with a minimum of fuss. They also have a smaller thread size when compared to regular standoffs which means a smaller hole size drilled into the sign being erected. This is particularly useful for mounting holes near the edge of the sign sheet.
The Ezi-Mount Standoff is made of Brass and is coated in either satin silver or gloss chrome finish and is available in a variety of sizes.